Stripped Servo

During a move from the East Coast home to the West Coast my aileron got knocked into a high position. Like an idiot I tried to adjust it neutral by hand instead of plugging in my transmitted and battery pack, which would have done it without stripping a gear.

I bought a replacement gear set for less than $6 for my Hitec 56HB servo. I only needed to replace one gear. I wanted to replace them all since I had it open, but I could not get the ball bearing off of one of the gears so instead of break that by trying to force it I just reused it since it was NOT damaged. It all works well and dandy now.

The whole process can be done in 20-30 minutes.

Unfortunately, I lost the second half the pictures for this slideshow showing you the reassembly of the servo and the white (bike) grease I used, but all you need to do is follow these two links: The Toys RCForum and RCHelisite.

Please note that if you are making your place sea worthy this would be a great time to use the black non-conductive grease that water proofs your entire servo. I read about that and it sounds neat.